beautypg.com

Installation instruction, Caution, Warning – Bosch WFMC1001UC User Manual

Page 5: Introduction, Information concerning waste disposal, Intended use, Environmental protection / conservation issues, Factoryćsupplied equipment

background image

5

INSTALLATION

INSTRUCTION

Introduction

d

CAUTION

d

TO AVOID RISK OF INJURY

The washing machine is heavy. Lift

with caution.

Be sure to observe all listed warnings

and cautions.

CAUTION

Frozen hoses can tear/burst. Do not

install the washing machine outdoors

or in an area exposed to freezing

conditions.

These installation instructions are

intended for use by qualified installers.

In addition to these instructions, if

installing the washing machine:

-

In the United States comply with

the National Electric Code,

ANSI/NFPA70 ć latest

edition/State and municipal and/or

local regulations.

-

In Canada comply with the

Canadian Electric Code C22.1 ć

latest edition/Provincial and

Municipal and/or local regulations.

If the washing machine is located in a

room which will be exposed to

temperatures below freezing, or if it is

located in a cabin that is being shut

down for the winter, any residual water

in the pump or water inlet hose(s) must

be drained.

Take care not to damage the washing

machine. Do not hold on to protruding

parts (e.g. door) when lifting.

In addition to the safety information

listed here, the local water and

electricity supplier may have special

requirements.

If in doubt, have the appliance

connected by an authorized

technician.

Information concerning

waste disposal

Disposing of the packaging

The shipping package has protected

your new appliance on its way to your

home. All packaging materials are

nonćpolluting and recyclable. Please

contribute to a better environment by

disposing of packaging materials in an

environmentally friendly manner.

Please ask your dealer or local

authority about the best means of

disposal.

d

WARNING

d

Keep children away from shipping

carton and packaging components.

Danger of suffocation from plastic

foil and folding cartons.

Disposing of your old appliance

Old appliances are not worthless

rubbish! Valuable raw materials can be

reclaimed from environmentally friendly

recycling.

d

WARNING

d

If appliance is no longer usable, pull

out main plug, cut off power cord

and discard.

To prevent children from locking

themselves in the appliance, disable

the door lock or remove the door.

Intended Use

Your washing machine is intended:

-

For domestic use only.

-

For washing machine washable

fabrics in washing water.

-

For operation using cold and hot

(140 °F/60 °C) tap water and

conventional additives that are

suitable for use in residential

washing machines.

Environmental

Protection / Conservation

Issues

Your washing machine uses water,

energy and detergent efficiently,

thereby protecting the environment

and reducing your household costs.

To use your washing machine in an

efficient and non polluting manner:

-

Avoid using too much detergent.

-

Use detergent bearing HE symbol

for high efficiency and front

loading washers.

-

Add detergent according to the

degree of soiling, amount of

laundry and water hardness, and

follow the detergent

manufacturer's instructions.

FactoryĆsupplied

equipment

There is a packet of accessory parts

supplied with your washer. Check that

all the accessory parts supplied for

your model are there. If any parts are

missing contact your dealer

immediately.

Inside the drum:

-

Water supply hose for cold water

(blue marking).

-

Water supply hose for hot water

(red marking).

-

Water drain hose.

A bag which contains:
-

Covers to be placed over the holes

for the transport bolts (after

removing them).

-

Clamp for drain hose.

-

Wrench for levelling.

-

Elbow for attaching the drain hose,

e.g. to a sink.

Depending on the type of connection,

the following may also be required:

-

YĆconnector (can be obtained

from any hardware store) in case

there is only a cold water

connection available.

Any residual moisture inside the drum

is due to the final testing which every

washing machine undergoes before

leaving the factory.