Aries Automotive 55-0000 User Manual
Page 2
PROCEDURE:
3. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
4. Start by inserting the nut plate into the opening on the bumper, as seen in (Fig 1) once insert as
seen in (Fig 2) Attach & secure the License plate relocator with (1) 8mm lock washers & (1) 8mm
x 35mm Hex bolt as seen in (Fig 3) Level and adjust the license plate relocator to the bumper and
tighten all hardware attaché your license plate with (4) 6mm button head bolts & (4) 6.5mm flat
washers.
To protect your investment, wax this product after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives
that could damage the finish.
Fig 1
Installation complete
Fig 2
Fig 3
Secure with
(1) 8mm x 35mm hex bolt
(1) 8mm flat washer
Nut Plate
Location of nut plate
2007-11 Wrangler used with 15600 bumpers
Hold plate in place