Aries Automotive 55-0000 User Manual
Installation instructions

PARTS LIST:
Qty Description
Qty
Description
1
License plate relocator
1
8mm x 35mm Hex bolt
1
Nut plate mounting bracket
1
8mm lock washer
1
8mm x 75mm Hex bolt
4
6.5mm ID X 20mm OD flat washers
4
6mm x 20mm button head bolts
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
2. Start by placing the nut plate behind the bumper with the nut facing to the back, once insert Attach
& secure the License plate relocator with (1) 8mm lock washers & (1) 8mm x 75mm Hex bolt as
seen in (Fig 1) Level and adjust the license plate relocator to the bumper and tighten all hardware
attaché your license plate with (4) 6mm button head bolts & (4) 6.5mm flat washers.
To protect your investment, wax this product after installing. Regular waxing is recommended to
add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives
that could damage the finish.
INSTALLATION INSTRUCTIONS
1976-06 CJ / YJ Wrangler Front Tubular Bumpers
2007-11 JK Wrangler Front Tubular Bumpers
2007-11 Wrangler license plate relocator used with 15600 bumper
PART # 55-0000
License plate relocator
Nut plate mounting bracket
Fig 1
Secure with
(1) 8mm x 75mm hex bolt
(1) 8mm lock washer