Aries Automotive 200008-2 - Manual (Page 2)

Page 2 of 2
3. Place Rear Bracket # 6 on the chassis holes "C" on the passenger side and attach it with bolts
# 10.
4. Screw Thread Bar # 11 to the Side Step # 2.
5. Insert the Side Step # 2 by Thread Bar # 11 in the Brackets (# 4 & # 6) and screw with
washers and nuts.
6. Install Side Step # 1 on the driver side in the same way.
7. Adjust the Side Steps and tighten the bolts.
Note:It is recommendable to retighten all fixing bolts and nuts after the SideStep has been in use
for some 1000 km/600 miles.
Picture for reference
○ 1
○ 2
○ 7
○ 3
○ 8
○ 8
○ 9
○ 6
○ 10
○ 5
○ 4