Aries Automotive 200008-2 User Manual
Installation instructions

2006-08 GRAND VITARA
PART # 200008 / 200008-2
Page 1 of 2
PART LIST
INSTALLATION STEPS
λ Please read this installation Menu before installing this part. When install it, pay attention to
protecting your vehicles.
λ When use it, please check this parts at a fix time - lapse, such as one month or two month.
No. NAME
QTY REMARKS No. NAME
QTY REMARKS
○
1
SIDE STEP (Lef t .Side) 1
FLAT WASHER
4 12mm
○
2
SIDE STEP (Right. Sidel) 1
○
9
CAPSCREW 4 M
8×25
○
3
FRONTBRACKET (Dr. Side) 1
LOCK WASHER 4 8mm
○
4
FRONT BRACKET( Pass. Side) 1
M10Ч25Ч1.25
FLAT WASHER 4
8mm
○
5
REAR BRACKET(Dr. Side) 1 10mm
○
10
Threaded Bar 8 M
10×40
○
6
. REAR BRACKET(Pass. Side) 1
LOCK WASHER 8 10mm
○
7
THREADED PLATE
2
FLAT WASHER 8
10mm
○
8
HEX NUT
4 M12
HEX NUT 8 M10
LOCK WASHER
4 12mm
1. Insert Thread Plate # 7 inside chassis hole "A" on the passenger side so that its other
threaded bar would expose from chassis holes "B" according to Pic. No 1.
2. Place Front Bracket # 4 so that Thread Bar # 7 expenses through it. Screw with nuts # 8 & # 9.
ATTENTION
INSTALLATION INSTRUCTIONS