Aries Automotive 200002-2 - Manual (Page 3)

SIDEBARS
06-11 MERCEDES BENZ ML SERIES
Page 2 of 3 3/13/13 REV1 (DP)
To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer
over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish.
For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be
used also to clean the Sidebar.
For gloss black finishes: Mild soap may be used to clean the Sidebar.
Driver Side Installation Pictured
Fig 1A
Front Bracket
with Hardware
Rear Bracket
with Hardware
Models with threaded plugs: Remove-unscrew
factory plastic plug (center) and outer jack pad...
12mm x 90mm Long
Bolt Plate (front
bracket pictured)
Fig 3
Fig 1B
Fig 2
...or use a small screwdriver to pry up the push in
factory plastic plug (center) and outer jack pad