Aries Automotive 2550 - Manual (Page 2)

INSTALLATION INSTRUCTION
SPORT BAR PART #2550
TOYOTA HIGHLANDER 08
Page 2 of 2
INSTALLATION STEPS
Step 1：Verify that all parts are present according to the manual.
Step 2：Remove the factory skid plate1 (Fig#1).
Step3：Install the L-bracket to the chassis using the ○ 3 ○ 4 ○ 5 ○ 6 ○ 7 ○ 8 ○ 9 ○ 10 ○ 15 ○ 16
of the vehicle as Fig#2.
1)、Remove the parts in the skid plate 2, open the skid plate 2(look the original hole).
2) 、Install the T bolt2 through the original hole under the chassis, install the plastic clipM6 to the T
bolt2 , Before install the bracket(Note: At the same time, install the T bolt1).
3) 、Install the bracket to the chassis using the○
4 ○ 5 ○ 6 ○ 8 ○ 9 ○ 10
.
Step 4：Repeat step 2 、3 for the R- bracket of vehicle to complete installation.
Step 5：Install the grille guard to the brackets using○ 11 ○ 12 ○ 13 ○ 14 as Install picture.
Step 6：Test and make sure that the grille guard is steadily fixed.
Step 7： Installation is finished .
Fig#1
○ 3 ○ 15
Remove the factory skid plate1
Fig#2
Open the skid plate
2 , put the bracket
in the that.
○ 7 ○ 8 ○ 9 ○ 10 ○ 16 ○ 3 ○ 4 ○ 5 ○ 6 ○ 15