Aries Automotive TB45-5005 - Manual (Page 5)

Page 5 of 5
Driver Side Installation Pictured
Installation pictured
without the splash
guard for illustration
Fig 7
If required, replace the
rivet with the supplied:
6mm x 20mm Button
Head Allen Bolts
6mm Flat Washers
6mm Nylock Hex Nuts
Installation Complete
Fig 9
(2) 12mm x 35mm Hex Bolts
(4) 12mm Flat Washers
(2) 12mm Lock Washers
(2) 12mm Hex Nuts
(Fig 8A) Driver side Support
Bracket in "no Tow Hook" position
Front
(Fig 8B) Driver
side Support
Bracket in "with
Tow Hook"
position
Front
(1) 10mm x 35mm Hex Bolt
(2) 10mm Flat Washers
(1) 10mm Lock Washer
12mm x 35mm Hex Bolt
(2) 12mm Flat Washers
12mm Lock Washers
12mm Hex Nuts
(also bolts the Bull Bar to
the Mounting Bracket)