Aries Automotive 1050-2 - Manual (Page 5)

Driver Side Installation Pictured
Page 5 of 5 01/20/12
Fig 12
(3) 12mm hex bolts
(6) 12mm flat washers
(3) 12mm lock washers
(3) 12mm hex nuts
Once the Mounting Brackets
have been installed and checked
for alignment, hold the splash
guard up into position and mark
the cut area on the inside of the
guard. Start with a small opening
and slowly enlarge the opening
to get the best fit around the
brackets. Area cut from guard
pictured for example only.
(Interior view)
Fig10
(1) 10mm flat washer
(1) 10mm lock washer
(1) 10mm hex nut
Mount bracket
Fig11
Installation complete