Aries Automotive 6054-2 - Manual (Page 3)

Page 3 of 3
Driver Side Installation Pictured
(2) 12mm x 30mm Bolts
(4) 12mm Washers
(2) 12mm Nylon Lock Nuts
(Fig 3) Cut (2) square openings approximately
1-3/4
” x 1-3/4” to clear the Mounting Brackets
Cut (2) slots approximately 3-1/2 ” x 1” Do not install fasteners in these (2)
locations when re-installing splash guard
(1) 8mm x 25mm Hex Bolt
(2) 8mm Flat Washers
(1) 8mm Nylon Lock Nut
(1) 10mm x 25mm Button
Head Allen Bolt
(2) 10mm x 20mm Flat
Washers
(1) 10mm Nylon Lock Nut
(Fig 4) Splash guard pictured for example only.
Actual item and modifications required may vary
Fig 5
Fig 6
Fig 7 Complete Installation Front
Front
Front
Front