Snorkel TB47J CE - Manual (Page 37)

Chapter 7 – Prestart Inspection
TB47J – 0075239EE 33
Driving and Work Lights
The machine may be equipped with driving lights and/or
platform working lights. Turn the engine on and use the
switch on the back of each light to momentarily turn it on
to see that it works.
Platform Control Cover
The machine may be equipped with an optional platform
control cover. Inspect the cover to ensure it fits properly
over the control panel.
Tow Kit
The machine may be equipped with an optional tow kit.
Inspect the tow bar and steering arm to verify the compo-
nents are present and in working condition.
Placards and Decals
Inspect all safety and operational placards and decals.
Make certain they are in place, in good condition, and
are legible.
The placards and decals may be cleaned with soap and
water, and a soft cloth if the words or pictures cannot be
seen.
A
Caution
Solvents may contain hazardous ingredients. Fol-
low the manufacturer’s label for proper use and dis-
posal. Wear protective gloves and splash-proof
safety glasses when using solvents.
Wet paint overspray may be removed using a natural bio-
degradable solvent and a soft cloth.
Replace any missing or illegible placards or decals be-
fore operating the aerial platform. Placard and decal kits
are available from Snorkel dealers.
The safety related placards and decals are illustrated on
the following pages.
0074210
0074311
Right Side
0074311
(One per Cylinder) 0190989E
0074210
0190989E
0190989E