Snorkel TB47J CE - Manual (Page 27)

Chapter 6 – Controls
TB47J – 0075239EE 23
Place the switch in the low position for normal machine
operation and in high to drive at maximum speed.
The engine has a three speed throttle operation from the
upper controls. Independent of the throttle switch, the
platform foot switch, when depressed, increases the en-
gine speed from low to mid-range.
High engine speed is obtained when the main boom is
horizontal, the foot switch is depressed, the throttle switch
is in the high position, and the drive joystick is moved out
of neutral into the forward or reverse position.
The machine can be driven in mid-range engine speed
with the throttle switch place in the low position.
Horn Button
The horn button is on the right side of the upper control
panel. Press the button to sound the horn.
Platform Foot Switch
The upper controls are interlocked through the platform
foot switch (refer to Figure 6.6). Step down on and hold
the platform foot switch to activate the drive and boom
functions from the upper controls.
Figure 6.6 – Platform
Machine/Generator Switch
The switch for the optional AC generator is located on the
front of the upper control panel.
With the engine running, place the switch in the genera-
tor position to provide electrical power to the electrical
outlet at the platform. Place the switch in the machine
position to turn off the generator and resume machine
operation.
Machine functions will not operate while the switch is in
the generator position.
Driving and Platform Work Lights
The control for the optional driving lights is on the back of
each light. Place the switch in the on position to operate
the driving lights.
The control for the optional platform work lights is on the
back of each light (refer to Figure 6.7).
Figure 6.7 – Platform Work Lights
Platform Foot
Switch