Snorkel X Series-sn17280-17572 - Manual (Page 20)

Page 18 Operation Manual
060572-025 X Series Labels
L ABELS
These labels shall be present and in good condition before operating the work platform. Be sure to read,
understand and follow these labels when operating the work platform.
066551-950
MAX = 113 kg = MAX = 113 kg = + 1
3 064936-099
4 101210-000
5 066551-950
6 X20N 066557-930
6 X20W, 26N
066557-957
6 X32N 066557-950
066557-951 066557-930
340 340
066557-951 066557-954
454
066557-951 066557-950
340
014222-903
Model______________ Serial number:___________
Machine weight _______kg Mfg. date:_________
Maximum wheel load:________
Maximum allowable incline of machine when elevated:_____deg.
Occupants and equipment must not exceed the rated maximum
load:_____kg Maximum platform occupants: _____
Maximum allowable sIde force on platform:_____N
Maximum platform height:______m
Maximum platform reach:______m
Maximum allowable wind speed: ______m/s=Beaufort scale_____
Maximum hydraulic system pressure:_____bar
Maximum system voltage: _______Vdc
This machine is manufactured to comply with
Machinery directive 89-392/CEE
CAUTION: CONSULT OPERATOR'S MANUAL BEFORE USE.
061205-003
THIS PLATFORM IS
NOT INSULATED
DIESE ARBEITSBÜHNE
IST NICHT ISOLIERT
CETTE PLATEFORME
N'EST ISOLEE
100102-900
7 014222-903
9 101208-000
10 060197-000
11 061205-003
15 100102-900
066561-902 066561-902
066561-900
16 X20N, 20W, 26N 066561-900
16 X32N 066561-902
005223-906
17 X20N, 20W, 26N 005223-906
005223-908
17 X32N 005223-908
010076-901
26,3 kg +
066522-900
INSIDE
INNSEITIG
L'INTERIEUR
107051-900
20 010076
25 066556-900
26 066559-900
29 062562-951
31 X20N 101222-904
31 X20W, 26N, 32N 101222-905
32 066522-900
33 101208-001
34 107051-900
35 030768-002
36 068635-001
IN CASE OF EMERGENCY push emergency stop switch to deactivate all powered functions.
AFTER USE, secure the work platform from unauthorized use by turning the keyswitch off and removing key.
Modifications to the aerial work platform are prohibited or permissible only at the approval by UpRight. NEVER charge batteries near sparks or open flame. Charging batteries emit explosive hydrogen gas.
To bypass any safety equipment IS PROHIBITED and presents a danger for the persons on the aerial work platform and in its working range. NEVER use a machine that is damaged, not functioning properly, or has damaged or missing labels.
VERIFY that all labels are in place and legible before using.
INSPECT the machine thoroughly for cracked welds, loose or missing hardware, hydraulic leaks, loose wire connections,
and damaged cables or hoses before using.
NEVER perform service on machine while platform is elevated without blocking elevating assembly. To extend the height or the range by placing of ladders, scaffolds or similar devices on the platform IS PROHIBITED!
IT IS PROHIBITED to keep the swing gate or liftable bar in an open position when the platform is raised!
Dismantling the swing gate or other railing components IS PROHIBITED! Always make certain that the swing gate is closed
and securely locked!
Climbing up the railing of the platform, standing on or stepping from the platform onto buildings or other structures, IS PROHIBITED!
IF ALARM SOUNDS while platform is elevated, STOP, carefully lower platform. Move machine to a firm, level surface.
NEVER operate the machine when wind speeds exceed this machine's wind rating. Read operator's manual for more details.
OPERATE machine only on surfaces capable of supporting wheel loads.
NEVER operate the machine without first surveying the work area for surface hazards such as holes, drop-offs, bumps, curbs,
or debris; and avoiding them.
DISTRIBUTE all platform loads evenly on the platform.
NEVER exceed the manual force allowed for this machine. Read operator's manual for more details. The use and operation of the aerial work platform as a lifting tool or a crane IS PROHIBITED!
Exceeding the specified permissible maximum load IS PROHIBITED! Read operator's manual for more details.
THIS AERIAL WORK PLATFORM IS NOT INSULATED! For this reason it is imperative to keep a safe distance
from live parts of electrical equipment!
USE OF THE AERIAL WORK PLATFORM: This aerial work platform is intended to lift persons and his tools as well as the material
used for the job. It is designed for repair and assembly jobs and assignments at overhead workplaces (ceilings, cranes, roof
structures, buildings etc.). All other uses of the aerial work platform are prohibited!
37 067195-001
PPE LOWERING
SWITCH
40 101235-000