Snorkel TL34-sn00001+ - Manual (Page 31)

2. Slew Drive Gears.
The slew drive gear is designed to be largely maintenance free. However, we
recommend the gear teeth be greased on a monthly basis with a high pressure
grease.
3. Checking Limit Switch Operation.
The limit switches require no maintenance, other than a visual inspection, on a pre
operation basis. This is an important check, to ensure the switch is not
mechanically damaged, and the roller is always in contact with the cam, when not
under load.
The switch operation can be simply checked, by observing the LED display when
deploying the stabilizers. As an outrigger foot touches the ground and becomes
loaded, the appropriate light will change to green. This indicates that the switch
contact has operated correctly
If the LED displays green at any other time then the machine must not be operated, until the
fault is rectified.
MAINTENANCE
Outriggers NOT
under load
Outriggers
under load
25