Snorkel TL34-sn00001+ - Manual (Page 21)

From Cage Controls
1. At the Ground Control Station, turn the key towards the ‘basket‘ icon.
2. Climb into the basket. Check that all emergency stop switches are released
(twisting release). The platform may now be raised, lowered or slewed in any
direction by operating the control levers at the basket, whilst depressing the
‘Green’ motor run button on the side of the control console. See Fig 8.
3. Push and hold the ‘Green’ Motor Run button on the control box (on machines with
a footswitch in the cage, press the footswitch).
4. Lift the lever for the boom you require (top or bottom) UP as indicated on the
label. The selected boom will elevate. Ascent speed can be controlled by varying
how far the lever is lifted.
5. When the desired height is reached, allow the lever to return to it’s rest (central)
position and release the ‘Green’ motor run button (or footswitch).
Repeat procedures 3 to 5 for each boom.
15
EXTENDING STRUCTURE
CAGE CONTROLS – FIG.8
The SET-UP section of this manual MUST be completed before
extending the structure.
Take EXTREME care when slewing both basket and turret, at
low levels. !
Before raising, ensure there are no overhead obstructions or
power cables and the outriggers are properly extended and
secure.
‘GREEN’ ELEVATE
MOTOR RUN BUTTON
BOOM
CONTROL LEVERS