Inspection and maintenance schedule, Daily preventative maintenance checklist, Maintenance table key – Snorkel SR3084SL User Manual
Page 21: Preventative maintenance report, Programme de contrôle et de maintenance, Légende du tableau de maintenance, Rapport de maintenance préventive, Plan de inspección y mantenimiento, Claves de la tabla de mantenimiento, Informe de mantenimiento preventivo
Inspection and Maintenance Schedule
505562-100
SR2684SL & SR3084SL
Page 17
I
NSPECTION
AND
M
AINTENANCE
S
CHEDULE
The Complete Inspection consists of periodic visual and operational checks, along with periodic minor
adjustments that assure proper performance. Daily inspection will prevent abnormal wear and prolong the
life of all systems. The inspection and maintenance schedule should be performed at the specified inter-
vals. Inspection and maintenance shall be performed by personnel who are trained and familiar with
mechanical and electrical procedures.
W A R N I N G
!
!
Before performing preventative maintenance, familiarize yourself with the operation of the machine.
Always block the elevating assembly whenever it is necessary to perform maintenance while the
platform is elevated.
The daily preventative maintenance checklist has been designed for machine service and maintenance.
Please photocopy this page and use the checklist when inspecting the machine.
D
AILY
P
REVENTATIVE
M
AINTENANCE
C
HECKLIST
M
AINTENANCE
T
ABLE
K
EY
Y = Yes/Acceptable
N = No/Not Acceptable
R = Repaired/Acceptable
P
REVENTATIVE
M
AINTENANCE
R
EPORT
Date:_______________________________________
Owner: _____________________________________
Model No: ___________________________________
Serial No: ___________________________________
Serviced By: _________________________________
COMPONENT
INSPECTION OR SERVICES
Y
N
R
Battery
Check electrolyte level.
Check battery cable condition.
Chassis
Check hoses for pinch or rubbing points.
Check welds for cracks.
Control Cable
Check the exterior of the cable for pinching,
binding or wear.
Controller
Check switch operation.
Drive Motors
Check for operation and leaks.
Elevating
Assembly
Inspect for structural cracks.
Emergency
Lowering System
Operate the emergency lowering valve and check
for serviceability.
Entire Unit
Check for and repair collision damage.
Hydraulic Fluid
Check fluid level.
Hydraulic Pump
Check for hose fitting leaks.
Hydraulic System Check for leaks.
Labels
Check for peeling, missing, or unreadable labels
& replace.
Platform Deck
and Rails
Check welds for cracks.
Platform Deck
and Rails
Check condition of deck.
Tires and Wheels Check for damage.
COMPONENT
INSPECTION OR SERVICES
Y
N
R