Towing or winching, Brake release pump, The machine will now roll when pushed or pulled – Snorkel SR3084SL User Manual
Page 16: Never tow faster than 0,3 m/sec. (1 ft./sec.), After use each day, Ensure that the platform is fully lowered, Hour meter, Pompe hydraulique de desserrage des freins, Après chaque utilisation au quotidien, Bomba de desactivación del freno
Page 12
SR2684SL & SR3084SL
505562-100
Towing or Winching
T
OWING
OR
W
INCHING
Perform the following only when the machine will not operate under its own power and it is necessary to
move the machine or when winching onto a transport vehicle (see “Transporting the Work Platform” on
page 13).
C A U T I O N
DO NOT tow or winch the machine faster than 0,3 m/s (1 ft./s). Faster speeds will damage drive
components and void the warranty.
B
R A KE
R
E L E A S E
P
U M P
Perform the following only when the machine will not operate under it’s own power and it is necessary to
move the machine or when towing the machine up a grade or onto a trailer to transport.
1.
Close the needle valve by turning the allen screw clockwise.
2.
Pump the Brake Release Pump until the Parking Brake Cylinder Rod clears the wheel rotor.
3.
The machine will now roll when pushed or pulled.
4.
Open needle valve and verify that the
cylinder rod has extended before the
machine is operated.
W A R N I N G
!
!
Never tow faster than 0,3 m/sec. (1 ft./sec.).
Never operate the work platform with the parking brakes released. Serious injury or damage could
result.
A
F T E R
U
S E
E
A C H
D
AY
1. Ensure that the platform is fully lowered.
2. Park the machine on a firm level surface, preferably under cover, secure against vandals, children and
unauthorized operation.
3. Turn the Chassis Key Switch to OFF and remove the key to prevent unauthorized operation.
H
O U R
M
E T E R
To access the hour meter function perform the following steps.
1. Climb into the basket (with the machine powered up)
2. Push the platform emergency stop button.
3. Hold down the following buttons, Horn & Lift.
4. While holding the buttons twist the emergency stop button to return power to the machine.
5. “hr” will now be displayed on the readout, Pressing the right turn button will scroll through the accumulated
hours two digits at a time. For example, if pressing the right turn button once displays “20”, pressing it a
2nd time displays “58”, and pressing it a 3rd time displays “hr”, the elapsed time of operation is 2058
hours.
Needle Valve
Hand Pump