Snorkel MX19-sn20000-20599ANSI - Manual (Page 12)

Page 10 060570-008 MX15 / MX19 - Operator Manual
Transporting the Machine
T RANSPORTING THE M ACHINE
B Y C R A N E
D A N G E R ! !
See specifications for weight of machine and be certain that crane is of adequate capacity to lift the
machine.
Secure the straps to Tie Down/Lift Points only.
B Y F O R K L I F T
D A N G E R ! !
Forklifting is for transport only.
See specifications for weight of machine and be certain that forklift is of adequate capacity to lift the
machine.
Both the MX15 and MX19 may be forklifted from the rear end of the machine between the wheels.They
may also be forklifted from the side using the forklift pockets shown in Figure 8.
Figure 8: Transporting the Machine
B Y T R U C K
Maneuver the machine into transport posi-
tion and chock the wheels. Secure the
machine to the transport vehicle by attach-
ing chains or straps of adequate load
capacity to the Tie Down/Lift Points.
C A U T I O N
Overtightening chains or straps attached to
the Tie Down/Lift Points may result in
damage to the machine.
Forklift
Tie Down/Lift Points
Forklift
Pockets