Snorkel AB62 - Manual (Page 13)

Operation
104044-001 AB62 Work Platform - Operator Manual Page 11
E X T E N D I N G T H E U P P E R B O O M
1. Set the Function Speed control dial to the desired setting. Rotate the dial clockwise to increase speed,
counterclockwise to decrease. If you are not sure what speed to use, start out slow; the speed can be
varied while operating the function.
2. While depressing the foot switch, push the Boom Extend control lever rearward to extend the boom, for-
ward to retract the boom. Release the control lever to stop extending/retracting.
E
L E V A T I N G T H E
J
I B
1. Set the Function Speed control dial to the desired setting. Rotate the dial clockwise to increase speed,
counterclockwise to decrease. If you are not sure what speed to use, start out slow; the speed can be
varied while operating the function.
2. While depressing the foot switch, push the Jib control lever forward to elevate the jib, rearward to lower
the jib. Release the control lever to stop elevating/lowering.
R O T A T I N G T H E P L A T F O R M
1. While depressing the foot switch, push the Platform Rotate control lever right to go counterclockwise and
left to go clockwise. Release the lever to stop rotation.
S W I T C H I N G F U E L S ( L P G O P T I O N )
1. With the engine running, turn the fuel selector switch to the opposite position.
• The engine should continue running on the selected fuel.
2. If the engine stalls, check the following:
• check the fuel supply in the selected tank.
• if LPG is selected, make sure that the valve is open on the tanks.
3. Restart the engine.