Micropump DB-380.B - Manual (Page 2)

2 of 20 MODEL 380 MOTOR INSTALLATION AND OPERATION MANUAL IOM # 7820
REV A
(10/99)
MICROPUMP, INC.
A Unit of IDEX Corporation
PO Box 8975, Vancouver, WA 98668-8975, USA
Phone: (360) 253-2008
Fax: (360) 253-2401
email: [email protected]
Website: www.micropump.com
MICROPUMP LIMITED
A Subsidiary of Micropump, Inc.
Howard Road, Eaton Socon
St. Neots, Cambs. PE19 3ET England
Phone: (44) (0) 1480-356900
Fax: (44) (0) 1480-356920
Website:
www.micropump.com
You have purchased a motor or pump/motor combination. This guide contains specific information for the Model 380 motor. When
installing or operating pump/motor combinations the instructions given in this guide should be read in conjunction with the
instructions provided with the pump.
List of Abbreviations
The following abbreviations are used in this guide:
Avg
Average
ºC degrees Celsius
DC Direct Current
EMI Electro-Magnetic Interference
IOM Instruction, Operation, Warranty and Maintenance Manual
Max
Maximum
Min Minimum
NdFeB Neodymium Iron Boron
RPM
Revolutions Per Minute
Typ Typical
V Volt(s)
W Watt(s)
GENERAL
Safety
The following safety definitions are used throughout this guide to indicate procedures that, if not
followed correctly, may result in injury to personnel or damage to equipment.
Warnings are used to alert the reader to a procedure or practice,
which if not followed correctly, could result in personal injury.
Cautions are used to alert the reader to a procedure or practice,
which if not followed correctly, could result in damage to the pump
and/or ancillary equipment.
Notes are used to highlight important information that may assist the
CAUTION
NOTE
WARNING