Micropump DB-380.B - Manual (Page 14)

14 of 20 MODEL 380 MOTOR INSTALLATION AND OPERATION MANUAL IOM # 7820
REV A
(10/99)
MICROPUMP, INC.
A Unit of IDEX Corporation
PO Box 8975, Vancouver, WA 98668-8975, USA
Phone: (360) 253-2008
Fax: (360) 253-2401
email: [email protected]
Website: www.micropump.com
MICROPUMP LIMITED
A Subsidiary of Micropump, Inc.
Howard Road, Eaton Socon
St. Neots, Cambs. PE19 3ET England
Phone: (44) (0) 1480-356900
Fax: (44) (0) 1480-356920
Website:
www.micropump.com
STANDARD LIMITED WARRANTY
The products manufactured by Micropump Incorporated are warranted to be free from defects in workmanship and material at the
time of shipment from the place of manufacture. Micropump will repair or replace, at its option, any part or component which fails
to conform to this warranty for a period of one year from date of original invoice, but not to exceed 18 months from the date of
shipment. Micropump's obligation under this warranty is limited to the repairs or replacement of defective equipment returned to
Micropump on an F.O.B. destination and freight-prepaid basis. All normal wear and tear is excepted, and product is subject to
examination at Micropump to verify that the parts or components were defective at the time of sale.
For the purposes of the limited warranties, the “Stator/Controller Assembly” means only the stator and the printed circuit board and
electronic components contained in the controller housing, plus the connecting control and power cables. The “Power Supply
Assembly” means only the printed circuit board and the electronic or mechanical components located inside or on the power supply
enclosure, and the Pumphead Assembly” means all other parts of the product, including but not limited to, the rotor.
No warranty of any kind is made or shall be imposed with respect to any pump or parts (1) which have not been properly installed
and tested in operation, (2) that have been subject to misuse, negligence, acts of God or the elements, or any other form of casualty,
or (3) which have been repaired or altered outside of Micropump's facility in a way, so as, in our judgment, to affect performance or
reliability.
The parties agree that the buyer's sole and exclusive remedy against Micropump shall be for the repair or replacement of defective
parts under the conditions stated above. The buyer agrees that no other remedy (including but not limited to incidental or
consequential damages for lost profits, lost sales, loss of use, injury to person or property, or any other incidental or consequential
loss) shall be available to it.
This warranty shall not apply to prototype pumps, experimental pumps, or brush-type electric motors. Warranty of equipment or
accessories from outside sources, purchased by Micropump and incorporated into Micropump’s product is subject to the
manufacturer’s standard warranty, unless specifically agreed otherwise between Micropump and buyer. A copy of the warranty on
the aforementioned equipment is available on request.
The adjustment or replacement of defective parts made under this warranty will not extend the original warranty period.
THE WARRANTY DESCRIBED ABOVE IS THE EXCLUSIVE MICROPUMP WARRANTY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY PREVIOUSLY ISSUED. WE NEITHER ASSUME
NOR AUTHORIZE ANY PERSON TO ASSUME FOR US ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE OR USE OF OUR EQUIPMENT.