Spyclops SPY-DVR Kit (ALL KITS) User Manual - Manual (Page 7)

7
• Camera Title: You can change each camera name as you select each different channel
• OSD Alpha: The menu transparency can be adjusted as needed
• VGA resolution: Choose the best VGA resolution for your monitor size, keep in mind if you are viewing on
a computer or laptop, will you have the screen maximized? The following chart can assist you in
determining which resolution is best for your monitor/screen
RESOLUTION SCREEN SIZE
800 x 600 780 x 430
1024 x 768 1000 x 600
1280 x 1024 1180 x 850
1920 x 1080p 50Hz/60Hz Most standard televisions
• TV Adjust: Not all screens will need this option. If you can’t see every corner of your menu screen; TV
Adjust will let you adjust the sides, bottom and top to fit the menu into your screen view
• Auto Switch: Select to switch camera views automatically. Can choose between every 2 seconds up to
every 10 seconds
3.3 Encode Set-up
*Note: If you have your target bitrate, but are having trouble achieving an acceptable quality video, you will have to
cut back in some aspect. The contributing factors that will lead to a higher video bitrate are the amount of pixels
(the resolution of the video), the frame rate, and the amount of motion present
• Channel: You can assign different settings to each channel (camera view). Remember after choosing all
the settings for each channel to hit “OK” and right click twice to save
• Stream: This is where you will set the settings for your main stream and sub stream. The main stream is
the stream you will see locally and can support “D1” encode format. Sub stream is the stream you will see
remotely from your phone so you wont need higher resolution, it should be “CIF” format
• Encode Mode: Select “Video only” for encoding video, select “AV stream” for encoding video and audio