Spyclops SPY-DVR Kit (ALL KITS) User Manual User Manual
Page 6
6
2.4 Factory setting
•
Factory reset “all” or each setup choice you choose
3.0 SYSTEM SETUP
3.1 General Set-up
•
Date time: This option is used to set up the date and time. If the wrong information is left populated, the
DVR will not record properly
*Note: click “Apply” to save date and time changes
•
Date format: [year, month, day], [month, day, year], [day, month, year]
•
Auto Logout: When enabled, the DVR will automatically logoff the present user if there is 10 minutes
without operation. They will need to login again to operate the device
•
Key buzzer: “Enable” will activate a beep when the DVR buttons are pushed. “Disable” will prevent
beeps from sounding when the buttons are pushed
•
Language: You can select one of six different languages
•
Standard: “PAL” is default setting. “NTSC” is the standard for North America and will need to be selected
for a clearer picture. If you are outside of North America you will need to check to see what standard
your country uses
*Note: Any time you change the resolution, the system will have to be rebooted to make changes
3.2 Screen Set-up
•
Channel: This will select each camera view so you can adjust each one accordingly
•
Color Adjust: To adjust Hue, Brightness, Saturation, and Contrast of each channel as needed. You can
copy your configuration to either another channel or all channels.