Lukas DUO Traversing System - Manual (Page 34)

34
9.3.4 Replacing handle on the traverse jack
All damaged or broken handles must be replaced.
Procedure for handles mounted directly on the traverse jack:
1. Undo and remove the screws holding the handle together with the washers.
2. You can now detach the handle and replace it.
3. Assemble in reverse order of removal.
Procedure for handles secured with clips:
1. Undo and remove the screws and nuts.
2. You can now remove the handle and washers from the traverse jack and replace it.If
the clips are damaged, remove them by pulling them in the direction of the jack head. Be
careful not to damage the hose lines.
3. Assemble in reverse order of removal.
Handle
Screw
Washer
Screw
Washer
Screws
Washers
Handle
Nuts
Clips