Lukas LSP 80 EN - Manual (Page 14)

14
15.1 Peeling
15.2 Oil recommendations
For LUKAS hydraulic devices, use mineral oil in accordance with DIN 51 524 and others
Recommended viscosity range: 10 ... 200 mm²/s,
delivered with HLP 22 to DIN 51 524
15.3 LUKAS Hoses
15.4 Others
LUKAS Hydraulik GmbH
A Unit of IDEX Corporation
Weinstraße 39, D-91058 Erlangen
Postfach 2560, D-91013 Erlangen • Germany
Tel.: +49(0)9131/698-0 • Fax: +49(0)9131/698-394
e-mail: [email protected]
© Copyright 2005 LUKAS Hydraulik GmbH
Bending radius Rmin = 38 mm
Burst resistance safety factor: burst pressure / max. operating pressure, min. 4 : 1
Temperature resistance - 40°C ... + 100°C
Operating medium
Mineral oil according to DIN 51524
Working temperature -20 ... +55°C
Ambient temperature (power pack in operation) -24 ... +45°C
Storage temperature (power pack not in operation) -30 ... +60°C
Range of oil temperature Viscosity rating Remarks
A - 24 ... + 30 °C HL 5
B - 18 ... + 50 °C HLP 10
C - 8 ... + 75 °C HLP 22
D + 5 ... + 80 °C HLP 32
E - 8 ... + 70 °C HF - E 15 biodegradable
Type LSP 40 B LSP 40 EN LSP 60 EN LSP 60 F LSP 80 EN
Max. thickness of steel plate t (mm) 4 4 5 5 5
Max. opening (mm x mm) 500 x 500 520 x 520 650 x 650 650 x 650 500 x 500
Spreader_LSP_BA_GB_0406.p65 subject to revision