Lukas SC 557 - Manual (Page 48)

48
* 1 MPa = 10 bar
** Necessary volume of hydraulic fl uid in the hydraulic unit to operate the unit
(differential volume on piston / rod side)
type SC 557
ref.no. 113047000
81-30-30
(173047000)
dimensions l x w x h
(w/o connection hoses)
[mm] 840 x 280 x 190
[in.] 33.1 x 11.0 x 7.48
max. cutting opening
[mm] 355
[in.] 14
max. cutting force
(rear end of the cutting surface)
[kN] 810
[lbf.] 182095
max. spreading distance
(on the blade tips)
[mm] 430
[in.] 16.9
min. spreading force
(25 mm from the tips)
[kN] 41,5
[lbf.] 9300
spreading force HSF
(according to NFPA)
[kN] 47
[lbf.] 10600
spreading force LSF
(according to NFPA)
[kN] 39
[lbf.] 8770
pulling force HPF
(according to NFPA)
[kN] 67
[lbf.] 15100
pulling force LPF
(according to NFPA)
[kN] 52
[lbf.] 11700
weight incl. hydraulic fl uid
[kg] 19,8
[lbs.] 43.7
max. operating pressure
[Mpa] * 70
[psi.] 10000
min. needed volume
of hydraulic fl uid
[l] ** 0,11
[gal.-US] 0.029
coupling system
quick-disconnect-
coupling
mono-coupling
classifi cation acc. to DIN EN 13204 CK 41/430 H-20
classifi cation acc. to NFPA 1936 A8/B9/C8/D9/E9