Lukas SC 557 - Manual (Page 40)

40
Since all values are subject to tolerances, minor differences may occur between the data on
your equipment and the data in the following schedules!
12. Technical Data
12.1 Cutters
* 1 MPa = 10 bar
** Necessary volume of hydraulic fl uid in the hydraulic unit to operate the unit
(differential volume on piston / rod side)
NOTE:
The following tables contain only the technical data required for standard
acceptance.
Additional data concerning your unit can be obtained from LUKAS on request.
type S 120
ref.no. 112001000
81-20-10
(172001000)
dimensions l x w x h
(w/o connection hoses)
[mm] 346 x 130 x 87
[in.] 13.6 x 5.1 x 3.4
max. cutting opening
[mm] 53
[in.] 2.1
max. cutting force
(rear end of the cutting
surface) [kN] 183
[lbf.] 41140
weight incl. hydraulic fl uid
[kg] 4,3
[lbs.] 9.5
max. operating pressure
[Mpa] * 70
[psi.] 10000
min. needed volume
of hydraulic fl uid
[l] ** 0,02
[gal.-US] 0.005
coupling system
quick-disconnect-
coupling
mono-coupling
classifi cation acc. to DIN EN 13204 AC53B-4
classifi cation acc. to NFPA 1936 A4/B3/C2/D3/E3