Road Armor 2003-2009 Dodge 2500,3500 Rear Bumper - Manual (Page 4)

STEP 1 :
Make sure you have all necesary tools and hardware.
Hardward Kit Includes : ( all Grade 8 )
( 8 ) .5” x 1.5” Bolts
( 2 ) .5” x 4.5” Bolts
(20) .5” Washers
(20) .5” Lock Washers
( 10 ) .5” Nuts
( 2 ) Retainer Clips
STEP2:
• Loosely fit brackets on frame using supplied long bolts.
• Aftermarket tow hitches may require some trimming.
• Install one bolt in Road Armor bumper per side using retainer clips as pictured below.
STEP3:
• Drill extra holes once fully installed.
• Check tailgate fitment side to side while opening slowly, also check height when fully open.