Road Armor 2003-2009 Dodge 2500,3500 Rear Bumper - Manual (Page 2)

STEP 1 :
Make sure you have all necesary tools and hardware.
Hardward Kit Includes : ( all Grade 8 )
( 6 ) .5” x 1.5” Bolt Plates
( 8 ) .5” x 4.5” Bolts
(22) .5” Washers
( 14 ) .5” Lock Washers
( 6 ) .5” Nuts
( 8 ) .5” Lock Nuts
( 2 ) Retainer Clips
STEP 2:
• Park on level surface and Disconnect Positive Battery
Terminal.
• Disconnect Factory Fog Lights and Remove OEM Bumper.
• Install winch prior to bumper installation with supplied
Alan Head Bolts. Don’t forget the fairlead bolts first.
• Once OEM bumper is removed...
STEP3:
• Loosely fit brackets on frame using supplied long bolts.
• Install one bolt plate in Road Armor bumper per side using retainer clips as pictured below.