Road Armor 2003-2009 Dodge 2500,3500 Rear Bumper - Manual (Page 3)

STEP 4:
• If guarded : Wrap corners with soft material to protect fenders from scratching.
• Measure between bracket holes and position bumper bolts for easy alignment.
• Carefully guide bumper onto brackets and tighten once bumper is adjusted.
• Using a silver sharpie or paint pen mark the contour of the bumper on inner fenderwell by
pulling it tight and tracing. Once traced, double check and make any necessary adjustments
then cut excess plastic and tuck into bumper.
• We recommend you drill two additional holes in the frame where noted below to ensure
bumper stability.
• Basque in glory. Congratulations! Time for a cold one!