Apple Newton Works Word Processor - Manual (Page 34)

I can’t print my paper.
m Make sure you’ve selected the correct type of printer and make sure your Newton
device is connected to a printer or a network.
m Check all the cable connections.
m Turn the printer off, wait 30 seconds, and turn it back on; then try again.
m You may be using the Casual font in your paper. The Casual font is intended
mainly for viewing information on the screen. To print a paper with the Casual
font, minimize the right margin setting. For more information, see the section,
“Setting Margins” in Chapter 2, “Learning the Basics.”
I beamed a paper to another Newton device and the recipient couldn’t
read it.
m To read a paper, the recipient needs to have the Newton Works word processor
software installed on his or her Newton device. If that device doesn’t have Newton
Works, you may be able to paste the text of the paper into another application,
such as a note in the Notepad, and beam that instead.
Many of my papers seem to be missing.
m You may have many papers. Tap Overview Ω . If you see scroll arrows along the
side of the screen, tap them to view papers that are off the screen. (A darkened
arrow indicates that there are more items above or below.)
m You may be looking at the contents of only one folder. Tap the folder tab and in
the list that appears, tap All Documents. Tap Overview Ω.
m If you stored your papers on a PC card, you need to insert the card to view
those items. Once you insert the card, a slip appears showing you information on
the card. Tap X to close the slip. Tap the folder tab, then tap All Documents. Tap
Overview Ω. Papers stored on the card have “Card” listed on the right side of
the overview which designates that they are stored on a card, instead of on
internal memory.
34 Chapter 5