beautypg.com

Apple Xserve (Early 2008) DIY Procedure for Drive Interconnect Backplane User Manual

Page 7

background image

Xserve (Late 2006/Early 2008) Drive Interconnect Backplane Replacement Instructions

7

Release the two locking levers on the front panel board cable connector and disconnect the

3.

cable from the front panel board. Move the front panel board cable out of the way.

Disconnect the backplane-to-logic board I/O cable from the backplane.

4.

Loosen the thumbscrew that secures the backplane to the enclosure.

5.

Note: The thumbscrew is captive; you cannot remove it.