beautypg.com

Apple iMac (Early 2008) User Manual

Page 46

background image

46

Chapter 4

Problem, Meet Solution

If only one IP address is used, then you must have a router capable of sharing the

connection, also known as network address translation (NAT) or “IP masquerading.”

For setup information, check the documentation provided with your router or ask

the person who set up your network. You can use an AirPort Base Station to share one

IP address among multiple computers. For information about using an AirPort Base

Station, check Mac Help or visit the AirPort Support website at

www.apple.com/support/airport.

If you cannot resolve the issue using these steps, contact your ISP or network

administrator.

Problems with AirPort Extreme Wireless Communication

If you have trouble using AirPort Extreme wireless communication:

 Make sure you have properly configured the software according to the instructions

that came with your base station.

 Make sure the computer or network you are trying to connect to is running and has a

wireless access point.

 Make sure you are within antenna range of the other computer or the network’s

access point. Nearby electronic devices or metal structures can interfere with wireless

communication and reduce this range. Repositioning or rotating the computer may

improve reception.

 Check the AirPort signal level. You may see up to four bars in the AirPort status icon

in the menu bar.