Apple Xserve (Early 2008) DIY Procedure for Battery - Manual (Page 4)

Xserve (Early 2008) Battery Replacement Instructions 4
Insert the replacement battery in the holder with the positive side (+) up and the negative 3.
side down.
Important: Dispose of the old battery according to the manufacturer’s instructions and your
local environmental laws.
Closing the Xserve
Replace and secure the cover. 1.
Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve 2.
in the rack.
If the server case was locked, use the enclosure key to lock the security lock on the front 3.
panel.
Warning: Never turn on the server unless all of its internal and external parts are in place
and it is closed. Operating the server when it is open or missing parts can damage it or
cause injury.