beautypg.com

Replacing the battery – Apple Xserve (Early 2008) DIY Procedure for Battery User Manual

Page 3

background image

Xserve (Early 2008) Battery Replacement Instructions

3

Replacing the Battery

Locate the battery between PCI card riser 2 and the memory cards on the logic board.

1.

Remove the old battery from the holder.

2.

Note: You can insert a flatblade screwdriver or nylon tool under the battery to ease the grip
between the spring and the holder. Then slide out the battery.
Warning: To avoid risk of explosion, replace battery only with type CR2032.