Apple PowerBook (200 Series) - Manual (Page 44)

Connecting your computer as a SCSI disk
Before making any connections, you need to assign a unique SCSI ID number
to the PowerBook. (The unique ID number allows the computer to
communicate with several connected devices.)
1 Choose Control Panels from the Apple ( K ) menu of your PowerBook computer.
2 Open the PowerBook Setup control panel.
3 In the SCSI Disk Mode section of the control panel, click the ID number you want
to assign.
If you are connecting the PowerBook to an existing SCSI chain, make sure to
give it an ID number different from those of the other devices. (Many devices
include an ID number indicator on the back panel.)
4 Close the PowerBook Setup control panel.
5 Turn off the PowerBook by choosing Shut Down from the Special menu.
6 Shut down the computer you are connecting to, and turn off any other devices in the
SCSI chain.
7 Connect the small connector on the Apple HDI-30 SCSI Disk Adapter cable to the SCSI
port on your PowerBook Duo MiniDock.
8 If you are connecting the PowerBook directly to the other computer (rather than to an
external device in the SCSI chain), attach a SCSI system cable to the other computer.
9 Connect the large connector on the Apple HDI-30 SCSI Disk Adapter cable to a SCSI
cable attached to the SCSI port on the last device in the SCSI chain, or to the SCSI
system cable on the other computer.
36 Chapter 3