beautypg.com

Apple Xserve (Early 2008) DIY Procedure for Processor User Manual

Page 11

background image

Xserve (Late 2006/Early 2008) Processor Replacement Instructions

11

Note: When installing the processor on the logic board, align the processor notch with the
tab on the processor holder, as shown. Then lower the processor straight down onto the
socket.

Rotate the top of the holder to the closed position.

4.

Engage the latch on the processor holder.

5.

Repeat the steps above for the second processor.

6.

See also other documents in the category Apple Software: