Apple Power Mac G4 (Digital Audio) - Manual (Page 70)

70 Chapter 4
Installing an AirPort Card
1 Position the AirPort Card with the AirPort ID numbers and bar code facing up and insert the
card into the AirPort Card connector.
2 Carefully attach the coaxial antenna wire to the port on the end of the AirPort Card.
The antenna wire is stowed on the side of the PCI card guide. Don’t bend or crimp the
wire tightly.
3 Close the computer.
Insert the AirPort Card—bar
code side up—until it is firmly
seated in the connector.
Plug the antenna wire into the
hole in the end of the AirPort Card. The antenna wire is stowed
here when not in use.
AirPort Card connector