Apple eMac - Manual (Page 6)

6 Chapter 1 Getting Started
Setting Up Your eMac
1 Plug the power cord firmly into the power socket (marked with the ≤ symbol on the
back of the computer) and plug the other end into a grounded outlet or power strip.
2 To enable Internet connectivity, connect your computer’s Ethernet port to an Ethernet
network or to your DSL or cable modem using an Ethernet cable. Or connect your
computer’s modem port (included on some models) to a telephone line using the
included phone cord and your computer’s modem port.
Modem port W AC cord
Telephone cord
Ethernet port
LL2385.book Page 6 Thursday, September 4, 2003 5:20 PM