Apple eMac - Manual (Page 39)

Chapter 4 Enhancing Your Computer 39
4 Touch metal inside the computer to protect the computer from damage caused by
electrostatic discharge.
Important: Always discharge static electricity before you touch any parts or install any
components inside the computer. To avoid generating static electricity, do not walk
around the room until you have finished installing the memory and closed the
computer.
5 Disconnect the power cord from the computer.
6 Insert the memory module into the memory slot. The module fits into the slot only one
way. Be sure to align the notches on the module with the small notches inside the slot.
With the ejectors in the open position, push down on the DIMM until it locks into
place. The ejectors will automatically close.
LL2385.book Page 39 Thursday, September 4, 2003 5:20 PM