Apple iMac G5 - Manual (Page 42)

42 Chapter 4 Enhancing Your Computer
To install a memory module:
1 Turn your computer off by choosing Apple (K) > Shut Down. Disconnect all cables and
the power cord from your computer.
2 Place a soft, clean towel or cloth on the desk or surface. Hold the sides of the computer
and slowly lay it down so the screen is flat against the surface and the bottom is facing
towards you.
3 Raise the stand and use a Phillips #1 screwdriver to loosen the three captive screws at
the bottom of the computer by turning them counter-clockwise.
Raise stand Phillips
screwdriver
Loosen 3 screws