Bunn ULTRA-1 User Manual

Page 12

Install Date

The following three screens will scroll after advancing past the function “Restore Defaults”. The Install Date

and Time is recorded when the dispenser is powered on for the first 100 hours. The Install Date and Time cannot

be reset and is stored in permanent memory.

INSTALL DATE

JAN. 20, 2005

3:55:25 PM

ULTRA

VERSION # __.__

PROGRAMMING THE DISPENSER (Cont.)

40563 052609

Set Night Time/Set Day Time

The setting of the Day/Night mode allows the dispenser to “power down” during off hours. The bottom corners

displaying “ICE” will change to “CHILL” during the night mode. During the night mode, the product will be kept

chilled to below 35°F. “ICE” reading will return after night mode elapses. With “OFF” representing 12:00 AM, the

operator can scroll to the times desired for the night time mode to begin and end.

NIGHT TIME MODE

CHILL

SET NIGHT TIME

(-)

OFF

(+)

SET DAY TIME

(-)

OFF

(+)

NOTE: Several other menu functions are included in this dispenser. Please refer the Programming Manual avail-

able on the Bunn website at www.bunn.com