Apple Multiple Scan 15 Display - Manual (Page 15)

2 Plug the other end of the power cord into an outlet or power strip.
If your computer has an available power socket, you can use a detachable
power cord (listed by a relevant safety agency) to plug the monitor directly
into the computer. You can get this cord from an Apple-authorized dealer or
service provider.
3 Connect the monitor cable to the monitor port on the back of the monitor.
4 Tighten the thumbscrews on the connection.
You can prevent bad connections and accidental damage by tightening the
thumbscrews.
5 Connect the other end of the monitor cable to the monitor port (marked with
™
) on the
back of the computer.
Monitor port icon
Monitor cable
™
9 Setting Up