Apple Xserve (Cluster Node) - Manual (Page 5)

5
3 Remove the protective faceplate from the server’s front panel by unscrewing the
thumbscrews at each side of the faceplate and lifting it off. Remove the additional shipping
screws on either side of the server. (The shipping screws do not need to be reinstalled unless
you intend to transport your server.)
4 Remove any plastic film from the front and rear of the server’s cover.
See “Summary of Hardware Installation” on page 12 for more information about installing
the server in a rack.
Your Server Hardware
Your model of the Xserve system differs somewhat from the model illustrated in the Xserve
User’s Guide. The illustrations on the pages that follow provide a reference for the specific
features of your server’s hardware.
Protective faceplate Remove the two shipping screws.
There is one screw on either
side of the server.
Remove the four thumbscrews that hold the protective faceplate
in place, and remove the faceplate by lifting it straight up.