Apple QuickTime Conferencing H.320/ISDN - Manual (Page 4)

Installing the H.320 card
The H.320 card is installed in your computer by an authorized service
representative. In general, it is not recommended that you remove the card.
However, if the card needs to be reinstalled, follow these steps:
1 Refer to the manual that came with your computer. Locate the chapter that explains how
to install an expansion card. Follow the instructions carefully to remove the computer’s
cover and install the card. (See the illustrations on the following pages.)
Do not replace the computer’s cover.
2 Plug the connector at the end of the H.320 card’s ribbon cable into the computer’s DAV
port. (The illustrations that follow show the card installed in each model of computer . )
DAV connector Ribbon cable H.320 card
Power Macintosh 8100 AV
3