Apple QuickTime Conferencing H.320/ISDN - Manual (Page 3)

The product you purchased comes with the following accessories:
m an H.320 card with a DAV (Digital Audio and Video) ribbon cable
m a telephone handset, with cable, to use while video conferencing (the
computer’s speaker can be turned off while the handset is in use to assure
privacy)
m an ISDN cable that plugs into the H.320 card inside your computer on one
end, and to an ISDN wall jack on the other end
m H.320 software (on the QuickTime Conferencing H.320/ISDN disk)
IMPORTANT If you have a Macintosh Quadra 840
AV
computer, you also need a
special DAV ribbon cable for connecting the H.320 card to your computer.
To install and use the H.320 card, you must have the following:
m a Power Macintosh 7100
AV
or 8100
AV
computer, or a Macintosh Quadra
840 AV computer, with 16MB of random-access memory (RAM)
m an ISDN line with an S-interface
m system software version 7.5 or later
m QuickTime Conferencing software
What’s in this booklet
This booklet contains information on installing the card in your computer,
plugging in the handset and ISDN line, installing the H.320 software, and
opening the Apple Media Conference program. A service representative may
have completed some or all of these steps for you. Please keep this booklet: if
you ever need to reinstall your card or its accessories or software, you can use
this booklet as a reference.
2