Apple Qadministrator 4 - Manual (Page 18)

Configuring the Wide Area Network Preferences Window
Apple Qadministrator wide area network preferences include the IP addresses for remote
computers.
To enter IP addresses or ranges for remote computers
1 Choose Apple Qadministrator > Preferences, or press Command-comma (,).
The Preferences window appears.
This table displays information about remote host computers.
2 Click Add (+).
The host address dialog appears.
Use this dialog to enter IP addresses or ranges for remote computers.
3 In the host address dialog, do one of the following:
• To enter the IP address of a specific computer, select Host, complete the Host Name
and IP Address fields, and click Add Host.
• To enter a range of IP addresses, select “Host IP address range,” complete the Range
fields, and click Add Range.
The hosts or host ranges appear in the Host table in the main Preferences window.
4 Once you have finished adding or removing IP addresses to this window, click OK.
18 Chapter 1 Using Apple Qadministrator