beautypg.com

Gas conversion, Mueller – Broilmaster P3-1 User Manual

Page 17

background image

Page 17

B100911-3-0806

1/8"

ORIFICE

HOOD

NUT

SUPPLY

TUBE

48

WRENCH

SUPPLY

TUBE

ORIFICE HOOD

HOSE A ND REGULA TOR

SUPP LY TUB E

HOSE AND REGULATOR

SUPPLY TUBE

ORIFICE HOOD

Gas Conversion

Propane grills include a conversion kit for natural

gas. If you have a natural grill and wish to convert

it to propane you will need to purchase the optional

conversion kit #BCK195.

Begin by removing all the components from the inside

of your grill. Locate and remove the orifice hoods

mounted on the underside of the grill body, using 2

wrenches as shown. Figure 13.

Gas Conversion

Before installing the natural hoods, inspect them for

damage and note the number stamped on the side. The

correct hood will be marked "48".

The hoods are self-sealing, requiring no additional pipe

sealant. If you wish to use sealant, take care to add it

to the threads only to avoid blocking the orifice.

Thread the hoods onto the supply tubes leaving about

a 1/8" gap between the hood and the locking nut.

Figure 14.

Remove the hose and regulator from the valve.

Replace the components inside of your grill.

Remove the knobs from the valve assembly and locate

the adjustment screws on the inside of the valve stem.

Using a small screw driver, turn the screws clockwise

until screw bottoms, then turn the screws four (4) FULL

turns counterclockwise. Do not back the screws out more

than 4 1/2 turns or a leak may result. Figure 15.

Connect the grill to the natural gas supply.

Important: Before lighting your grill, check the gas

connections and the adjustment screws for leaks using

a soapy water solution.

Caution: Never use this or any gas appliance which

may be leaking gas.

Replace the knobs.

ADJUSTMENT SCREW

VALVE STEM

CONTROL PANEL

OFF

3

HI

OFF

RIGHT

3

HI

LEFT

1

LO

2

LO

2

1

Figure 13

Figure 14

Figure 15

Place the completed conversion label adjacent to the

product identification label, located on the control

panel (26).

NOTE: When converting your grill to Natural gas and

your incoming gas pressure is below 7", a DPA105

regulator kit can be purchased.

Mueller