Broilmaster P3-1 - Manual (Page 13)

Page 13 B100911-3-0806
G
RILL
A
SSEMBLY
Installing Racks
Place the briquet rack (8) or flavor screen rack (28) on
the burner assembly.
Position the flavor screen (29) on to flavor screen rack
(28) or the ceramic briquets (7) evenly on the briquette
rack without overlapping.
For Smoker Shutter installation see DPA100 manual
included with your P3S grill.
Set the multilevel cooking grids Figure 9.
17
5
4
Figure 9
Individually place the ‘Char-Master’ briquets in a single
layer evenly on your grill’s briquet rack; DO NOT dump
them onto the briquet rack. A single layer of ‘Char-
Master’ briquets is all that’s needed. DO NOT overlap
or stack the briquets.
See Figure 9.
After properly placing the ‘Char-Master’ briquets on
your grill’s briquet rack, there may be some briquets
left over. Save them for future use.
Before cooking, always preheat the grill as directed by
the grill’s operating instructions. Hot briquets cause
better, quicker cooking and better flavor.
Cleaning
Routine preheating and routine burn-off (also called
postheating) of a grill will clean the ‘Char-Master’
briquets. Periodically turn the briquets over while they
are cool.
6
7
8
29
30
(P3S only)
6
28
(P4F only)
Installing Char-Master Briquets