Apple Xserve Intel (Late 2006) DIY Procedure for Processor - Manual (Page 6)

Xserve (Late 2006) Processor Replacement Instructions
Processor
Release the latch on the metal processor holder.
Rotate the top of the holder to the open position.
Lift the processor out of the holder.
Important: When removing or installing a processor, always hold the processor by the edges.
Be extremely careful not to touch the gold pins on the bottom of the processor, as this type of
connector is very sensitive to contamination. Also be careful not to touch the gold pins in the
processor socket on the logic board.
1.
2.
3.